WGM PAPER CUTTERS

WGM cutters have been designed to adapt to modern production processes. The oscillating descent of the blade takes place hydraulically in order to obtain a fluid and precise cut. In this way, the stopping time of the blade in its bottom dead center can be adjusted according to the material. The ultra-smooth stainless steel top allows for effective material movement. The pressure of the tamper can be finely adjusted in order to best adapt to the type of material. Luminous LEDs draw the cutting line so as to make it clearly visible to the operator. Adopt digital servo control technology, automatic lubrication, data resolution 0.01mm, self-diagnosis function and operation mode display, 300 groups of programs, more than 30,000 different cutting positions, can be memorized and memorized, can be dynamically tracked. Two hand button operation, single cycle cutting and other safety devices. The machines are managed by means of a control panel located in an ergonomic position, equipped with a 15” LCD display and color keypad with self-diagnosis function. Series of recurring cuts can be stored and modified at any time. The creation of cutting programs on the model can take place both manually and by means of a specific help menu. The most advanced model F can be integrated into the digital workflow, the cutting data is transferred directly from the prepress unit into the ppf or jdf files. To automatically start the cutting program, the machine can be equipped with an optional barcode reader: in this way set-up times can be reduced almost to zero. By means of the visualization function, the cutting process is graphically displayed, significantly reducing the risk of errors. To optimize the quality of the cut, the pre-pressing time can be adjusted according to the material.